New Items

Approx. Rs 1.32 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: k4000CNB
• Delivery Time: 1 DAY
• Packaging Details: EXPORT STANDARD PACKING

Approx. Rs 40 / PieceGet Latest Price

• The FXA expansion Anchor bolt is suitable for pre-positioned and push through installation, also suitable for stand off installation under certain conditions.
• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
• The head embossing offers a simple control of the anchoring.

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Facades

• Concrete C20/25 to C50/60, non-cracked

• ETA-13/0772
• DoP No. 0034
• DoP No. 0756-CPD-0606

Additional Information:

• Production Capacity: trading
• Delivery Time: 4 to 5 days as per availability
• Packaging Details: inner small carton

Approx. Rs 19,440 / PieceGet Latest Price

• 6 mm (1″) 2.2 J Combination Hammer with HEPA Self Dust Collection, SDS-PLUS Bits
• Filter Cleaning Mechanism for More Efficient Drilling
• HEPA filter removes particles with an efficiency rating of 99.75%
• Dust collecting port on telescopic guide with a sliding range of 190 mm enables to accept longer drill bits
• Secure connection between dust case and dust collecting section for less dust leakage
• See-through dust case for easy checking of collected dust amount
• Easy dust case removal for convenient dust disposal and cleaning
• Easy to adjust position of dust collecting port
• A desired drilling depth can be obtained simply by sliding a push button on telescopic guide
• Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• Soft grip provides more comfort and control
• Powerful 800 W motor delivers 2.2 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
• Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
• Variable speed trigger allows operator to adjust speed based on materials or application
• Depth gauge for increased drilling consistency

Approx. Rs 20,820 / PieceGet Latest Price

26 mm (1″), Adapted for SDS-PLUS bits

26 mm (1″) 2.2 J AVT Combination Hammer with HEPA Self Dust Collection, SDS-PLUS Bits

• 26 mm (1″) 2.2 J AVT Combination Hammer with HEPA Self Dust Collection, SDS-PLUS Bits
• Filter Cleaning Mechanism for More Efficient Drilling
• HEPA filter removes particles with an efficiency rating of 99.75%
• Dust collecting port on telescopic guide with a sliding range of 190 mm enables to accept longer drill bits
• Secure connection between dust case and dust collecting section for less dust leakage
• See-through dust case for easy checking of collected dust amount
• Easy dust case removal for convenient dust disposal and cleaning
• Easy to adjust position of dust collecting port
• A desired drilling depth can be obtained simply by sliding a push button on telescopic guide
• AVT (Anti-Vibration Technology) – extremely low vibration achieved by a counterweight mechanism and damper spring
• Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• Soft grip provides more comfort and control
• Powerful 800 W motor delivers 2.2 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
• Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
• Variable speed trigger allows operator to adjust speed based on materials or application
• Depth gauge for increased drilling consistency

Approx. Rs 29,460 / PieceGet Latest Price

40 mm (1-9/16″) 6.1 J Rotary Hammer, SDS-MAX Bits

• Built-in torque limiting clutch disengages if bit jams
• Powerful 1,050 W motor delivers for the most demanding applications
• One-touch sliding chuck for quick & easy bit changes
• Dual mode operation rotation with hammering and hammering only
• Soft grip helps reduce vibration felt by the end-user
• No hammering when idling increases the tool life and performance
• Chisel lock allows the end-user to set their chisel in one of 12 positions
• Built-in torque limiter ensures stable torque control
• Soft grip helps reduce vibration felt by the end-user
• Recessed operation mode switch helps prevent it from being damaged
• Depth gauge for increased drilling consistency
• Double insulated

Approx. Rs 81,900 / PieceGet Latest Price

1-3/16″: 30 mm Hex Shank

• 48.9 J AVT SOFT NO LOAD Electric Breaker, 30 mm Hex Shank
• Both drastically increased power and low vibration are achieved with minimum increase in tool size and weight
• Powerful 1,850 W motor delivers 48.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
• Thanks to completely redesigned hammering mechanism and increased motor power as compared with HM1317C series, higher power is achieved with minimum increase in tool size and weight
• Despite the drastically increased power; Anti-vibration housing, Active dynamic vibration absorber and Soft no-load keep the vibration lower than that of HM1317C series, allowing for efficient chipping for a long period
• L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• Variable speed control dial enables user to match the speed to the application for greater versatility
• L.E.D. power light indicates switch failure or cord damage
• Rubberized ergonomic soft grip provides more comfort
• Soft start suppresses start-up reaction for more precision and better accuracy
• Extended life brushes are longer for more work between service intervals and less downtime
• Automatic brush cut-off protects commutator from damage for longer tool life
• Easy-to-operate slide switch increases productivity and allows for continuous use
• Side handle swivels 360° for greater control
• Double insulated

Approx. Rs 18,180 / PieceGet Latest Price

• HEPA Filter Removes Particles with an Efficiency Rating of 99.75%
• Dust collecting port on telescopic guide with a sliding range of 190 mm enables to accept longer drill bits
• Secure connection between dust case and dust collecting section for less dust leakage
• See-through dust case for easy checking of collected dust amount
• Easy dust case removal for convenient dust disposal and cleaning
• Easy to adjust position of dust collecting port
• A desired drilling depth can be obtained simply by sliding a push button on telescopic guide
• Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• Soft grip provides more comfort and control
• Powerful 800 W motor delivers 2.2 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
• Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
• 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
• Variable speed trigger allows operator to adjust speed based on materials or application
• Depth gauge for increased drilling consistency
• Recessed lock-on button for continuous use
• Double insulated

Approx. Rs 10,200 / PieceGet Latest Price

• High durability design with zig-zag armature varnish, enhanced sealing, improved impact bolt and impact reducing cushion ring
• Extended life brushes are longer for more work between service intervals and less downtime
• Speed and torque in reverse are the same as forward rotation by using brush holder unit
• Powerful 780 W motor delivers 2.4 J of impact energy to handle the most demanding applications
• Torque limiter engineered to prevent gear damage by automatically disengaging gears if the bit binds
• 40 Bit angle settings allow the bit to be set at optimum positions
• 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
• “No hammering when idling” function helps increase tool life
• Ergonomic “Pistol-shaped” handle with soft grip for increased comfort and control
• One-touch sliding chuck for quick bit changes
• Recessed lock-on button for continuous use
• Rubber housing bumper protects mode selector switch and gear housing from damage
• Variable speed control enables user to match the speed to the application
• Depth gauge for increased drilling consistency
• Connectable to Makita vacuum cleaners
• Double insulated

Additional Information:

• Production Capacity: Concrete: 24 mm (15/16″) Core Bit: 54 mm (2-1/8″) Steel: 13 mm (1/2″) Wood: 32 mm (1-1/4″)

Product Price :Get Latest Price