Professional Drilling Engineering

• Dust proof construction: Thoroughly dust protected and built to survive the harshest of jobs
• High power output: High impact force ensures good chiselling performance
• Low pushing pressure: Increases impact force, while reducing vibration

• The best weight-to-power ratio on the market.
• Dual anti-vibration system: In the handle and in the machine's transmission mechanism.
• Secure grip for increased productivity in perpendicular applications.

• Top performance when drilling and chiselling thanks to 1700 watt motor and 19 joules of single impact energy
• Automatic switch lock for the best convenience in continuous chiselling applications
• Low vibration of only 8 m/s² when chiselling and 10 m/s² when drilling due to intelligent triple vibration damping system

Bosch GBH2-26RE 26mm SDS Rotary Hammer Impact stop for drilling in wood and steel. Ball grommet for preventing cable breaks. Soft grip on main handle and auxiliary handle. Overload clutch.

Bosch GBH 2-26 RE SDS Plus 26 mm Rotary Hammer Drill 800 Watt

Impact Energy- 2.7 - 3 J

• User buys a GBH 8-45 DV Professional and gets various accessories for free!
• Peak performance in Drilling and Chiselling
• Three-way Vibration Control System, Turbo Power Function

• Power Input (W) : 650 Drilling Capacity -Concrete (mm) : 13
• Drilling Capacity - Brick & Tile (mm) : 13 Drilling Capacity - Steel (mm) : 13
• Drilling Capacity - Aluminium (mm) : 10 Drilling Capacity - Wood (mm) : 15
• Rated Voltage (V) : 230 No-load Speed (rpm) : 0 - 3,000
• Chuck Drill Holding Capacity (mm) : 1.5 - 13

• Compact Design with a Short Overall Length
• Reliable 10 mm double sleeve keyless drill chuck for easy bit installation and removal
• Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
• 2-mode operation for “Rotation Only” or “Hammering with Rotation” for multiple applications
• Variable speed control by trigger enables user to match the speed to the application
• Rubberized soft grip provides more control and reduced fatigue
• Recessed lock-on button for continuous use
• Reversing switch is conveniently located
• Externally accessible carbon brushes for easy replacement
• Optional hook can be attached
• Double insulated

• 2 operation modes -hammering with rotation and rotation only
• Variable speed + reversible rotation
• Continuous rating input :

  710W

• Capacities:

  Concrete: 20 mm (3/4″)
  Steel: 13 mm (1/2″) Wood: 32 mm (1-1/4″)

• Impacts Per Minute (IPM) :

  0 – 4,050

• No Load Speed (RPM) :

  0 – 1,050

• :

  352 mm (13-7/8″)

• Net weight :

  2.3 kg (5.1 lbs.)

• Power supply cord :

  4.0 m (13.1 ft)

• High durability in mechanical parts, motor and carbon brush
• 2.2 Joules (EPTA) impact energy delivers high performance
• 2 operation modes – hammering with rotation and rotation only
• Speed and torque in reverse are the same as forward rotation by using brush holder unit
• One-touch sliding chuck enables easy bit change
• Variable speed trigger allows operator to adjust speed based on materials or application
• Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
• Ergonomically designed rubberized grip provides more control and comfort
• Side grip with elastomer soft grip
• Easy-to-operate large trigger switch and lock-on button
• Depth gauge for increased drilling consistency
• Double insulated

7.6 J Demolition Hammer, SDS-MAX Bits

• Compact Power with Less Weight
• Powerful 1,100 W motor delivers 7.6 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• L.E.D. power light indicates switch failure or cord damage
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Extended life brushes are longer for more work between service intervals and less downtime
• 12 Bit angle settings allow the bit to be set at different positions for operating convenience
• One-touch sliding chuck for easy bit changes
• Automatic brush cut-off protects commutator from damage for longer tool life
• Rubberized ergonomic soft grip provides more comfort
• Easy-to-operate slide switch
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Increased repairability obtained by using ingenious Brush holder unit for simplified wiring
• Double insulated

• Powerful 850 W motor for enhanced performance
• Active Vibration Control for comfortable and fatigue-free use
• Robust metal-covered gearbox for reliability and durability

• Reduced contact pressure & long hammer tube for good and balanced performance
• 15% higher impact force ensure high material removal rate
• Strengthen impact housing for longest lifetime in the class

Bosch GBH 2-26DRE SDS Plus 26 mm Rotary Hammer Drill 800 Watt

Faster than a speeding bullet – The all-rounder for daily use

• Superior drilling rate in the 2 kg hammer class
• Rotation stop for chiselling
• Impact stop for drilling in wood and steel
• Impact Energy- 0 - 3 J

The GBH 200 rotary hammer drill from Bosch is designed to drill perfect holes in hard concrete surfaces. It can drill up to 20 mm in diameter in concrete ..

Bosch GBH 220 20 mm Rotary Hammer Drill 550 Watt

40 mm (1-9/16″) 8.3 J Rotary Hammer, SDS-MAX Bits

• Powerful 1,100 W motor delivers 8.3 J of impact energy to handle the most demanding applications
• Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• LED service light notifies the user approximately 8 hours before the brushes need to be replaced
• LED power light indicates switch failure or cord damage
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Depth gauge for increased drilling consistency
• Double insulated

52 mm (2-1/16″) 19.1 J Rotary Hammer, SDS-MAX Bits

• Powerful 1,510 W motor delivers 19.1 J of impact energy to handle the most demanding applications
• Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• LED service light notifies the user approximately 8 hours before the brushes need to be replaced
• LED power light indicates switch failure or cord damage
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Depth gauge for increased drilling consistency
  • Double insulated

18.6 J AVT SOFT NO LOAD Demolition Hammer, SDS-MAX Bits

• AVT (Anti Vibration Technology) ensures extra-low vibration performance
• Vibration absorbing handle provides comfortable operation
• Suppression of motor speed during no-load reduces vibration of tool body
• Compact power with less weight
• Powerful 1,510 W motor delivers 18.6 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more precision and better accuracy
• L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• L.E.D. power light indicates switch failure or cord damage
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Extended life brushes are longer for more work between service intervals and less downtime
• 12 Bit angle settings allow the bit to be set at different positions for operating convenience
• One-touch sliding chuck for easy bit changes
• Automatic brush cut-off protects commutator from damage for longer tool life
• Rubberized ergonomic soft grip provides more comfort
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Soft grip provides more comfort and control
• Increased repairability with simplified wiring and bit holding mechanism
• Double insulated

21.7 J Demolition Hammer, 30 mm Hex Shank

• Chipping performance ensures minimum power loss even when bull point is kept pushed against concrete in chipping operation
• High durability
• Powerful 1,510 W motor to handle the most demanding applications; 1,450 BPM to tackle demanding jobs
• Rubberized soft grip provides more control and less hand fatigue
• Adjustable large side handle improves operator comfort and control
• Lock-on button: easy to operate for both right and left handed users
• Aluminum housing of Makita-blue
• Auto lubrication
• Accepts 30 mm Hex shank