Professional Drilling Engineering

Standard concrete is typically 4,000-5,000 psi. Whereas, epoxy systems from Simon Surfaces typically reach at or above 10,000 psi. It can be two-to-three times stronger than concrete.

Two-component reactive resin mortar, pure epoxy, styrene-free

 

Individual attachment in cracked and non-cracked concrete, seismic performance category C1 (M12 to M30) and C2 (M12, M16):

Anchor rod W-VD-A, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1

 

Reinforcement attachment with subsequent mortaring (REBAR)

 

Cartridge can continue to be used until the best before date, by changing the mixer nozzle or resealing it with the end cap

• European Technical Assessment ETA-09/0040: Individual attachment + cracked and non-cracked concrete (anchor rod W-VD-A,, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1), seismic performance category C1 (M12 to M30) and C2 (M12, M16)
• European Technical Assessment ETA-07/0313: Reinforcement attachment with subsequent mortaring (REBAR)

Pure epoxy injectable adhesive Construction chemical Epoxy Application Structural application Reinforce bar fixing Chemical anchor fixing

Permeation grouting (also known as cement grouting, chemical grouting, or pressure grouting) fills cracks or voids in soil and rock and permeates granular soils with flowable grouts to create a cemented mass

Permeation grouting (also known as cement grouting, chemical grouting, or pressure grouting) fills cracks or voids in soil and rock and permeates granular soils with flowable grouts to create a cemented mass

Permeation grouting (also known as cement grouting, chemical grouting, or pressure grouting) fills cracks or voids in soil and rock and permeates granular soils with flowable grouts to create a cemented mass.

FISCHER FIS EM PLUS
The powerful injection mortar for rebar connections and cracked concrete.
Available in 3 variants : FIS EM 390 S / FIS EM PLUS 390 S / FIS EM PLUS 585 S
Product descriptionThe fischer injection mortar FIS EM Plus 585 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor  RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, or heavy-duty steel constructions.
Product features
FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.

• The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
• For rebar connections from diameter 8 to 40 mm.
• Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
• FIS EM Plus is to be processed at temperatures down to -5°C.
• More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.

Advantages
The optimised formulation of the epoxy mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.

• The ETA assessment guarantees a service life of 100 years. The IEA expert report even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
• The mortar can be used for rebar connections from diameter 8 to 40 mm.
• With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.
• Temporary and detachable fixing points are possible with the internal threaded anchor RG M I.
• For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5° C.
• The mortar is approved for diamond-drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2 and thus offers safety under extreme conditions.

Applications

• Post-installed rebar connections
• Jointers for concrete layers
• Rim beam anchorings
• Seismic applications
• Anchorings in diamond-drilled or in waterfilled drill holes
• Heavy steel constructions
• Silo installations
• Tall shelving
• Sound barriers
• Temporary or removable fixings (with internal threaded anchor RG M I)

Approved for anchorings in:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Natural stone with dense structure

* You can find detailed information on building materials in the registration document.